Cần xiết lực 60-300Nm Stahlwille 721/30

Cần xiết chỉnh lực 1/2" 60-300 Nm Stahlwille 721/30.
Mã hàng: 50200030
Thông số kỹ thuật:
Stahlwille 721/30 50200030 Torque Wrench

Code	Size					Dr	b1	b2	h1	h2	L	LF
						inch	mm	mm	mm	mm	mm	mm	g
50200005	5	6–50 N m	5–36 ft.lb	2 N m	1 ft.lb	3/8"	28	27.5	23	14.5	352	293	900
50200015	15	30–150 N m	25–110 ft.lb	5 N m	5 ft.lb	1/2"	28	41	23	18	452	387	1305
50200030	30	60–300 N m	50–220 ft.lb	10 N m	10 ft.lb	1/2"	28	44	23	27.5	553	486	1720

721 Torque wrenches with reversible ratchetStandard 
MANOSKOP® 721
• cut-out type
• rapid setting
• dual stop signal
• twin scales N m/ft.lb
• the measuring element is only under load while force is being applied, no need for manual reset to zero
• any force applied to the tool after the ‘click’ or applied in the opposite direction to the current function – e.g.
forcible loosening of a jammed screw - does not act on the trigger mechanism and cannot cause damage to it.
• all the sensitive components are protected by the sturdy tubular steel housing
• calibration using perfectControl calibrating unit No 7794 or calibration system No 7706. Adjustment without disassembly.
• with certificate
• display deviation value ± 4%