Máy hiện sóng cầm tay Fluke 124

Liên hệ

Mã sản phẩm: 124
Thương hiệu: Fluke
Công nghệ: Mỹ
Xuất xứ: Trung Quốc
Bảo hành: 12 Tháng
Trọng lượng: 1.2 Kg

Title:

Kích thước:

Màu sắc:

Máy đo hiện sóng Fluke 124

Thông số kỹ thuật:

Máy hiện sóng cầm tay Fluke 124 (40Mhz, 2CH)

Specifications
Oscilloscope Bandwidth	Fluke 124:	40 MHz


Dual input True RMS Meter		Vdc, Vac, Vac+Vdc, Ohms,Continuity , Diode-test
Dual input True RMS Meter		Current, °C, °F, Capacitance, dBV, dBM, Crest Factor, Touch Hold and Zeroset
TrendPlot Recording		Automatic vertical scaling and time compression.
TrendPlot Recording		Display the actual, MIN, MAX and AVG reading.
Cursors	Fluke 125/124:	∆T, 1/∆T, V, ∆V, rise- and fall time
Real-time sample rate		25 MS/s
Equivalent sampling rate		up to 2.5 GS/s (125, 124) or 1.25 GS/s (123).
Inputs and digitizers		2
Timebase range	Fluke 125/124:	20 ns - 1 min/div
Timebase range	Fluke 123:	10 ns - 1 min/div
Input sensitivity		5 mV - 500 V/div
Trigger types		Connect-and-View™, Free Run, Single Shot, Edge, Video, External
Glitch capture		40 ns
Scope measurements		Automatic measurements: 26 (all instruments) On top, Fluke 125 has additional measurement functions for Power (W), VA, VAR and Power Factor (PF) for single phase and balanced-three-phase (delta) power systems.
Harmonics mode		Fluke 125 has capbility to analyze the harmonics contents of power signals. See below for details.
Maximum record length		512 min/max pts per input
Memory	Fluke 125/124:	20 screens and setups
Memory	Fluke 123:	10 screens and setups
Additional Power measurement capabilities (Fluke 125 only)
Measurement types:	•	Watt,
	•	VA,
	•	VAR,
	•	Power Factor (PF)
Power configuration:		Single phase or balanced three-phase (delta-configuration) mains supply
Voltage measurement		Channel A; using STL120, voltage probe or direct input
Current measurement		Channel B, using i400s (included) or other compatible current clamp
Current Clamp or Shunt sensitivity:		0.1 / 1 / 10 / 100 / 1000 mV/A, 10 mV/mA and 400 mV/A.
Harmonics Mode (Fluke 125 only)
		Converts waveform information into a harmonics display (using FFT processing) which shows the relative amplitudes of the 1st up to the 33rd harmonic
Analyzed waveform:		Voltage waveform(Ch.A), Current wavefrom (Ch.B) or Power (Ch.A x Ch.B), automatically generated.
Harmonics Frequency range:		DC up to 33rd harmonic (for fundamental up to 60 Hz);
Harmonics Frequency range:		DC up to 24th harmonic (for fundamental up to 400 Hz).
Display		Bargraph showing 1st up to 33rd harmonic and DC; amplitude displayed in % relative to fundamental
Measurements:		Relative amplitude of individual harmonics;
Measurements:		THD in %r or %f.
Environmental Specifications
Operating Temperature		0 ºC to 50 ºC
Storage Temperature		-20 °C to +60 °C
Operating Altitude		3,000 m
Mechanical & General Specifications
Size		232 x 115 x 50 mm
Weight		1.2 kg
Warranty		3-years on main instrument, 1-year on accessories
Battery Life		7 hrs using NiMH
RS232/USB Interface		Optically isolated via optional PM9080 or OC4USB for interfacing to Printer or PC

Mô tả

Máy đo hiện sóng Fluke 124

Thông số kỹ thuật:

Máy hiện sóng cầm tay Fluke 124 (40Mhz, 2CH)

Specifications
Oscilloscope Bandwidth	Fluke 124:	40 MHz


Dual input True RMS Meter		Vdc, Vac, Vac+Vdc, Ohms,Continuity , Diode-test
Dual input True RMS Meter		Current, °C, °F, Capacitance, dBV, dBM, Crest Factor, Touch Hold and Zeroset
TrendPlot Recording		Automatic vertical scaling and time compression.
TrendPlot Recording		Display the actual, MIN, MAX and AVG reading.
Cursors	Fluke 125/124:	∆T, 1/∆T, V, ∆V, rise- and fall time
Real-time sample rate		25 MS/s
Equivalent sampling rate		up to 2.5 GS/s (125, 124) or 1.25 GS/s (123).
Inputs and digitizers		2
Timebase range	Fluke 125/124:	20 ns - 1 min/div
Timebase range	Fluke 123:	10 ns - 1 min/div
Input sensitivity		5 mV - 500 V/div
Trigger types		Connect-and-View™, Free Run, Single Shot, Edge, Video, External
Glitch capture		40 ns
Scope measurements		Automatic measurements: 26 (all instruments) On top, Fluke 125 has additional measurement functions for Power (W), VA, VAR and Power Factor (PF) for single phase and balanced-three-phase (delta) power systems.
Harmonics mode		Fluke 125 has capbility to analyze the harmonics contents of power signals. See below for details.
Maximum record length		512 min/max pts per input
Memory	Fluke 125/124:	20 screens and setups
Memory	Fluke 123:	10 screens and setups
Additional Power measurement capabilities (Fluke 125 only)
Measurement types:	•	Watt,
	•	VA,
	•	VAR,
	•	Power Factor (PF)
Power configuration:		Single phase or balanced three-phase (delta-configuration) mains supply
Voltage measurement		Channel A; using STL120, voltage probe or direct input
Current measurement		Channel B, using i400s (included) or other compatible current clamp
Current Clamp or Shunt sensitivity:		0.1 / 1 / 10 / 100 / 1000 mV/A, 10 mV/mA and 400 mV/A.
Harmonics Mode (Fluke 125 only)
		Converts waveform information into a harmonics display (using FFT processing) which shows the relative amplitudes of the 1st up to the 33rd harmonic
Analyzed waveform:		Voltage waveform(Ch.A), Current wavefrom (Ch.B) or Power (Ch.A x Ch.B), automatically generated.
Harmonics Frequency range:		DC up to 33rd harmonic (for fundamental up to 60 Hz);
Harmonics Frequency range:		DC up to 24th harmonic (for fundamental up to 400 Hz).
Display		Bargraph showing 1st up to 33rd harmonic and DC; amplitude displayed in % relative to fundamental
Measurements:		Relative amplitude of individual harmonics;
Measurements:		THD in %r or %f.
Environmental Specifications
Operating Temperature		0 ºC to 50 ºC
Storage Temperature		-20 °C to +60 °C
Operating Altitude		3,000 m
Mechanical & General Specifications
Size		232 x 115 x 50 mm
Weight		1.2 kg
Warranty		3-years on main instrument, 1-year on accessories
Battery Life		7 hrs using NiMH
RS232/USB Interface		Optically isolated via optional PM9080 or OC4USB for interfacing to Printer or PC